AdelWiggins provides special connectors to serve high performance applications. AdelWiggins' quick disconnect couplings are used in Military and Commercial aircraft, Space Launch Vehicles, Nuclear and Bio-Medical industries. These applications require couplings to handle a variety of fluids, including coolants, fuel, hydraulic, and cryogenic fluids while maintaining minimal leakage, air inclusion and pressure drop. In addition, a wide variety of frangible connectors are available to prevent leakage of fluids where crashworthiness is required.
-
Quick Disconnects for general purposes, electronic cooling, hydraulic fluids, and hydrocarbon fuels
​​
-
Sizes -04 through -32
-
Materials include both anodized aluminum and stainless steel
-
Dust Plugs and Caps available. Part numbers are EC209-(SIZE) or EC208-(SIZE) for plug and cap respectively
-
Very minimal fluid leakage and air inclusion during connection / disconnection
-
Available with multiple end fittings such as MS33677, MS33656, and MS33657
-
Applicable specifications: MIL-C-7413B, MIL-C-25427A, MIL-E-5400H
-
Operating pressure: 50 to 125 Psig, Proof Pressure: 250 to 400 Psig, Burst Pressure: 600 Psig
​​
-
Operating temperature: -65°F to 450°F (dependent seal material)
200 Series QDs
-
Quick Disconnects for Hydraulic, Pneumatic, fuel, and other fluid systems
-
Sizes -04 through -32
-
Materials include both anodized aluminum and stainless steel
-
Dust Plugs and Caps available. Part numbers are 6009-(SIZE) and 6008-(SIZE) for plug and cap respectively
-
Applicable Specifications: MIL-C-7413A, MIL-F-8615A, MIL-C-25427A, MIL-H-8775, MIL-C-5502, and MIL-E-5272
-
Operating pressure: 50 to 125 Psig, Proof Pressure: 250 to 400 Psig, Burst Pressure: 600 Psig
6000 Series
-
Blind mate quick disconnects for electronic cooling, hydraulic fluids, and general purpose
-
Sizes –02 through –24
-
Operating pressure 300 psig
-
Self-sealing
-
Non-self locking
-
Temperature Range: -65°F. to +475°F. (depending on 0-Ring material).
-
Available in Aluminum or CRES
9100 Series Couplings
-
Thread to connect couplings for high flow and low pressure drop for electronic cooling, hydraulic fluids, and general purpose
-
Sizes -03 through -20
-
Operating pressure 750-4000 psig (dependent on size and material)
-
Design minimizes air inclusion and fluid loss. Nipple poppet seal also serves as the interface seal, eliminating spillage when connected or disconnected.
-
Many end fitting configurations
-
Designed to minimize weight, envelope size, and the travel length required to connect.
-
Temperature Range: -65°F. to +475°F. (depending on 0-Ring material).
-
Available in Aluminum or CRES
9200 Series QDs
-
Quick Disconnects for high flow and low pressure drop for electronic cooling, hydraulic fluids, and general purpose
-
Sizes –03 through –20
-
Operating pressure: 300 psig, proof pressure 600 psig, burst pressure 1200 psig
-
Design minimizes air inclusion and fluid loss. Nipple poppet seal also serves as the interface seal, eliminating spillage when connected or disconnected.
-
O-Rings are not exposed. This reduces contamination and eliminates the problem of shearing of exposed O-Rings.
-
Simple latching mechanism increases reliability, yet provides a smooth, positive latch eliminating partially-locked positions.
-
Many end fitting configurations
-
Relief valve available in nipple half. Cracking pressure range from 10 to 200 PSIG.
-
Designed to minimize weight, envelope size, and the travel length required to connect.
​
-
Temperature Range: -65°F. to +475°F. (depending on 0-Ring material).
-
Available in Aluminum, CRES, Monel and Titanium
9400 Series QDs
-
Quick Disconnects for high flow and low pressure drop for electronic cooling, hydraulic fluids, and general purpose
-
Sizes –03 through –20
-
Operating pressure: 300 psig, proof pressure 600 psig, burst pressure 1200 psig
-
Design minimizes air inclusion and fluid loss. Nipple poppet seal also serves as the interface seal, eliminating spillage when connected or disconnected.
-
O-Rings are not exposed. This reduces contamination and eliminates the problem of shearing of exposed O-Rings.
-
Simple latching mechanism increases reliability, yet provides a smooth, positive latch eliminating partially-locked positions.
-
Redundant locking
-
Many end fitting configurations
-
Relief valve available in nipple half. Cracking pressure range from 10 to 200 PSIG.
-
Designed to minimize weight, envelope size, and the travel length required to connect.
​
-
Temperature Range: -65°F. to +475°F. (depending on 0-Ring material).
-
Available in Aluminum, CRES, Monel and Titanium
9500 Series QDs
-
Quick Disconnects for high flow and low pressure drop for electronic cooling, hydraulic fluids, and general purpose
-
Sizes –03 through –20
-
Operating pressure: 300 psig, proof pressure 600 psig, burst pressure 1200 psig
-
Design minimizes air inclusion and fluid loss. Nipple poppet seal also serves as the interface seal, eliminating spillage when connected or disconnected.
-
O-Rings are not exposed. This reduces contamination and eliminates the problem of shearing of exposed O-Rings.
-
Simple latching mechanism increases reliability, yet provides a smooth, positive latch eliminating partially-locked positions.
-
Redundant locking
​
-
Metric
-
Many end fitting configurations
-
Relief valve available in nipple half. Cracking pressure range from 10 to 200 PSIG.
-
Designed to minimize weight, envelope size, and the travel length required to connect.
​
-
Temperature Range: -65°F. to +475°F. (depending on 0-Ring material).
-
Available in Aluminum, CRES, Monel and Titanium
9600 Series QDs
-
Main application for Hydraulic Fluid
-
Sizes -04 through -24
-
Material is stainless steel
-
Operating Pressure: up to 500 Psig depending on size
-
Burst Pressure: 600 Psig
-
Prevents loss of critical system fluid
-
Shear pins and bending failure section for frangible functions
Frangible Couplings/Connectors
-
Straight and 90-degree swivel joints
-
Allow Rotation of the Hose/Coupling, which prevents twisting, kinking and excessive bending
-
Sizes –03 through –24
-
Operating pressure 3000 psig
-
Various end fittings available
-
Adapters available for different end fitting types
Swivels and Adapters
-
A variety of valves available for various application such as general use, coolant lines, hydraulics, and fuel applications.
-
Valves restrict, shut off, modify, or allows flow depending on type
-
Sizes –04 through –24 depending on valve type
-
Valve types include check valves, fuse valves, restrictor valves, bleed valves, relief valves, float valves, ball valves, needle valves, and more
-
Valves cover a wide variety of temperature and pressure ranges
Valves
-
Hose assemblies available for various application such as general use, coolant lines, hydraulics, and fuel applications.
-
Sizes –04 through –20
-
Low and high pressure hoses available 250 – 6000 psig depending on size, temperature, and surge conditions.
-
Straight, 45 degree, and 90 degree AN and flareless end fittings available. Custom ends such as flanges, QDs, or end types available upon request.
-
Conductive and non-conductive options available.
-
Convoluted and smooth bore options available for applications where increased flexibility is required.
-
Simple latching mechanism increases reliability, yet provides a smooth, positive latch eliminating partially-locked positions.
-
Wide temperature Ranges -325°F to +1200°F depending on hose material selection.
-
Available in CRES or synthetic braid with Teflon, EPDM, Nylon, or Hytrel inner core.
Hoses
-
Specialty products available upon request
-
Examples include motor actuated butterfly/ball vales with user defined electrical connectors
-
Solenoid valves
-
Water metering valves
-
Temperature control valves
Specialty Products